Moen EX75C Garbage Disposal Review: Worth It? (November 2026)
The Moen EX75C is worth buying if you want more grinding power than a 1/2 HP disposer and a quicker install. Its 3/4 HP motor and Snap mounting tool suit busy kitchens, but the InSinkErator Badger 5 costs less for everyday scraps.
On this page (7 sections)
The Moen EX75C is a solid 3/4 HP disposal for households that cook often, and it earns a 7.9 score here. Its Snap mounting tool and pre-installed cord shorten the install, but the InSinkErator Badger 5 is the better buy for most people because it does everyday grinding for less.
This Moen EX75C garbage disposal review covers what the extra horsepower buys you, how the install works and where the Badger models beat it.
The Moen EX75C at a glance
The EX75C is Moen's Host Series model with a 3/4 HP motor, a Snap mounting tool and a power cord already fitted. Moen positions it for people who cook for guests and need more cleanup power than a basic unit.
Moen EX Series 3/4 HP (EX75C): Best for busy kitchens
- 3/4 HP motor
- Snap mounting tool
- Pre-installed power cord
- Quiet Close feature
A 3/4 HP disposer from Moen's Host Series with a tool-assisted mount and a cord already fitted. A sensible step up for households that cook for guests often.
Pros
- 3/4 HP motor for tougher scraps
- Snap tool helps secure the mount
- Power cord included
- Integrated mounting bracket
Cons
- Higher price than 1/2 HP models
- Quiet Close cover is one extra part to handle
It's a step up from the 1/2 HP class in power, and the install extras are the reason to look at it before a cheaper model. If you just need to clear plates after dinner, the lower price of a Badger 5 makes more sense.
The model number is EX75C and the part number matches it. Moen lists it in black with no finish applied to the metal, so the color name refers to the housing rather than a decorative coating.
It's sold as a single unit and first appeared on the market in June 2020.
When the Moen EX75C makes sense
Buy it when your sink sees frequent cooking and you want more grinding headroom than a 1/2 HP disposer offers. The 3/4 HP rating is the headline, and Moen's install helpers reduce the fiddly part of the job.
It also makes sense when you are replacing an older unit and want to do the swap yourself. The cord, flange, drain elbow and mounting assembly all ship in the box, so the job starts as soon as you open it.
Skip it if your loads are light or your cabinet is cramped. A 1/2 HP or 1/3 HP unit covers soft scraps and small bones, and both InSinkErator models here come with cords.
The specs that matter in daily use
Horsepower sets how much the disposer can take on, and the EX75C's 3/4 HP motor is its main advantage. That rating suits households that grind vegetable peels, small bones and leftovers from meals cooked for several people.
Weight and size matter as much as power when you're fitting a unit. The EX75C weighs 12.1 pounds and measures 14.7 x 9.8 x 9.7 inches, so plan space under the sink before delivery.
The depth figure covers the full assembly from the sink flange down, which is why it reads longer than the cabinet body alone.
Moen lists the EX75C under the Host Series name and describes it for people who often cook for guests. That's a marketing description, but it lines up with the 3/4 HP rating as the feature to weigh first.
The build material is galvanized steel, and the motor runs on a standard corded electric feed through the pre-installed cord. Moen describes the design as quiet and space-saving, with sound insulation built into the housing.
The marketing text leans on that claim more than the spec sheet does, so judge it by the features Moen actually lists.
The Quiet Close special feature refers to the cover closing softly. It's a comfort detail, not motor sound insulation, so don't expect a silent grind from the name alone.
Moen's style label for the unit is Premium, which sits above the plainer entries in its range.
That score is a snapshot of how buyers rate it, not a measure of how it grinds.
For a fuller picture of how Moen's range stacks up, see our guide to the best Moen garbage disposals across the Prep and Chef lines.
How the Snap installation works
The EX75C's install is its second selling point, and the Snap tool is the part that saves time. Moen says the tool quickly secures the mounting assembly, so you're not fighting a mounting ring by hand.
The unit also has an integrated mounting bracket that Moen says secures the valve directly to a brace. That design is meant to streamline the fitting and cut time compared with a basic mount.
Everything needed arrives in the box. Moen includes the disposal, the pre-installed power cord, the drain elbow, the mounting assembly and the sink flange, so you aren't buying a cord separately.
The order of the job matters. Seat the flange and gasket in the sink opening first, then set the mounting assembly and tighten it with the Snap tool before hanging the disposal body.
The drain elbow connects last, and the cord is already fitted so there is no wiring step at the end.
Follow Moen's instructions for your sink type and check the flange and gasket seating before you tighten anything. A disposer that leaks at the flange usually needs the mount re-seated, not more force.
If you're replacing an older unit and want to compare horsepower classes first, our 1/3 HP vs 1/2 HP garbage disposal breakdown helps you decide whether 3/4 HP is more than you need.
Care and everyday use
Treat the EX75C as a 3/4 HP disposer that still needs sensible loading. Run cold water while grinding and for a few seconds after, and feed scraps in small amounts rather than pushing a full plate down at once.
The cold water does two jobs. It helps carry ground waste through the drain elbow and it keeps the grind chamber from heating up during a long run.
Hot water on its own softens grease so it can coat the pipe walls further down.
Keep fibrous foods, large bones and grease out of the drain. The extra power helps with tougher scraps, but it doesn't make the disposer a bin for everything, and grease still coats the pipes.
Coffee grounds and eggshells are the kind of small debris that moves through easily when you feed them gradually.
The Quiet Close cover should be set down gently rather than dropped. Clean the flange and splash guard with a soft cloth and check for food trapped around the rim.
The sink flange is part of what ships in the box, so the rim you clean is the one Moen supplied.
Use the disposer regularly rather than leaving it idle for weeks. A short run with cold water keeps the grind chamber from sitting with residue, and it's easier to spot a slow drain early.
A slow drain points at the elbow or the trap more often than the motor.
The trade-offs to weigh
The main trade-off is price against power. The EX75C costs more than a 1/2 HP model, and for light everyday scraps that extra horsepower rarely gets used.
You are paying for headroom you may only need on cooking-heavy days.
Its 12.1 pound weight and under-sink footprint are ordinary for a 3/4 HP unit. Still, a tight cabinet with plumbing in the way can make any disposer awkward to fit, so measure first.
The 14.7 inch depth is the figure to check against your cabinet, not the width alone.
The Quiet Close cover is one more part to handle at the sink. Some people like the soft close; others prefer a simple stopper they can drop in without thinking.
Moen lists the unit's material as galvanized steel rather than stainless steel, so it trades the corrosion resistance of a stainless grind chamber for the coating. That is a fair point to weigh if you run the disposer hard and rarely.
Moen backs the EX75C as part of its EX Series, and the unit ships with the mounting hardware and cord in the box. Moen doesn't publish a warranty term for this model, so weigh the value on the hardware and install extras rather than on coverage.
Weigh the install extras against the cheaper InSinkErator options below before you decide.
The alternatives worth a look
InSinkErator Badger 5 with Power Cord
The Badger 5 is the value pick here and scores 9 for good reason. It's a 1/2 HP continuous-feed disposer with a Dura-Drive induction motor and galvanized steel grind components.
InSinkErator says the motor delivers more jam-busting torque for everyday scraps.
InSinkErator's Lift and Latch mount makes the sink connection easier, and the compact design fits existing InSinkErator hardware for a quicker swap. The factory-installed cord saves a wiring step too.
The body measures 6.31 x 6.31 x 11.5 inches and weighs 5 pounds, so it is a much smaller unit than the Moen under the cabinet.
The box includes the disposal, cord, stopper, discharge tube, flange, gasket, hardware and a Jam-Buster wrench. InSinkErator also covers it with a 3-year in-home service warranty and describes it as septic-safe for properly maintained systems.
Choose it over the Moen if you want dependable everyday grinding at a lower price. You give up 1/4 HP and the Snap tool, and in return you get the simpler, more affordable unit for most kitchens.
See how it stacks up in our garbage disposals for the money roundup.
InSinkErator Badger 1 with Power Cord
The Badger 1 suits light use and small sinks at 8.1. It's a 1/3 HP continuous-feed model with a compact design that leaves room under the sink for other items.
The body is the same compact footprint as the Badger 5, so it slots into tight cabinets.
Its Twist-On, Twist-Off Quick Lock mount makes replacing an existing InSinkErator disposer fast, and InSinkErator includes the flanges, gaskets and bolts. A 1-year limited service warranty covers it.
InSinkErator calls the mount Lift and Latch as well, and the wrenchette in the box is the tool for freeing a jam.
Pick the Badger 1 when you mostly grind soft scraps and your cabinet is short on space. It handles less than the Moen's 3/4 HP motor, so skip it if you regularly grind tougher leftovers.
Our Moen Prep Series PRO review covers another Moen option if you'd rather stay in that family.
The verdict on the Moen EX75C
The Moen EX75C is a buy if you want 3/4 HP power and an easier install. The Snap mounting tool, integrated bracket and pre-installed cord remove some of the usual friction, and the bigger motor suits kitchens that cook often.
Skip it and choose the InSinkErator Badger 5 if you grind everyday scraps and want the better value. Pick the Badger 1 instead when your sink space is tight and your loads are light.
For most readers, the Badger 5 is the overall pick and the Moen EX75C is the step up when power matters.
The decision comes down to how often your sink sees tough scraps. A household that cooks for guests several times a week gets real use from the 3/4 HP motor and the quicker mount.
A household that mostly rinses plates does not.
Our score weighs specs, features and buyer feedback against what you're shopping for. Check under-sink space and horsepower needs before ordering so this Moen EX75C review points you to the right model.
Frequently asked questions
Is the Moen EX75C a good garbage disposal?
The Moen EX75C is a good choice when you want 3/4 HP grinding power and a faster install. Its Snap mounting tool and pre-installed cord help, though a 1/2 HP InSinkErator costs less if you only grind everyday scraps.
What size disposal is the Moen EX75C?
The Moen EX75C is a 3/4 HP disposal in Moen's EX Series. It weighs 12.1 pounds and measures 14.7 x 9.8 x 9.7 inches, so check under-sink clearance before ordering.
Does the Moen EX75C come with a power cord?
Yes. The Moen EX75C includes a pre-installed power cord along with the drain elbow and mounting assembly.
That means you don't need to wire a separate cord before connecting it.
How does the Moen EX75C compare with the InSinkErator Badger 5?
The Moen EX75C has more power at 3/4 HP, while the InSinkErator Badger 5 is a 1/2 HP model with a compact design. Pick the Moen for tougher scraps and the Badger 5 for straightforward everyday grinding.
What is the Quiet Close feature on the Moen EX75C?
Quiet Close is a Moen feature listed for the EX75C. It refers to the sink cover closing softly rather than dropping.
Treat it as a comfort detail, not as sound insulation for the motor.
Who should skip the Moen EX75C?
Skip the Moen EX75C if you only grind light everyday scraps or your sink cabinet is tight. A 1/2 HP or 1/3 HP model covers those jobs for less, and both InSinkErator options here have cords fitted.
